New
Reclining and stabilizing wheelchair Netti III XHD Meyra
3240,00 €
This is a medical device. Use it according to the instructions for use or the label.
Indications:
- Impaired trunk stability
- Higher body weight and intensive wheelchair use
- Elderly and geriatric users
- Hemiplegia
- Lymphedema (elephantiasis)
- Hip and pelvic rotation
- Limb contractures and asymmetries
- Rheumatic conditions
- Traumatic brain injuries
- Neurological and age-related disorders
- Involuntary movements and spasticity
- Limb amputations
Product features:
- Individual adjustment – adjustable seat depth, armrest height and footrest position
- Position adjustment – adjustable seat tilt and backrest recline
- Dual gas springs – provide greater stability during adjustment
- Reinforced construction – reinforced frame, seat plate, backrest hinges and armrest mounts
- Trunk support – 17 cm high lateral supports
- Enhanced comfort – wide armrest pads (42 × 8 cm)
- Leg stabilisation – durable Netti Grandis positioning leg rests
- Netti Stabil back cushion – improved back support and lateral stabilisation
- Side protection – aluminium side guards
- Air travel – suitable for air transportation and not classified as dangerous goods
- Vehicle transportation – approved for use as a vehicle seat in accordance with ISO 7176-19
Standard equipment:
- Seat tilt adjustment from -9° to +16°
- Reinforced solid front and rear wheels with quick-release axles
- Backrest recline adjustment from 86° to 133°
- Stepless seat depth adjustment
- Reinforced standard seat plate
- Netti SIT pressure-relieving, gently contoured seat cushion with breathable 3D upholstery
- Standard backrest system with mesh upholstery and adjustable tension straps
- Height-adjustable (+30 cm), foldable and removable push handles
- Netti STABIL back cushion with lateral support and breathable 3D upholstery
- Easy-to-clean Easy Care upholstery
- Aluminium headrest mounting adapter
- Choice of headrest:
- Deep Type A (horseshoe-shaped)
- Oval Type B (small)
- Wide rectangular Type C, with slightly raised outer edges
- Removable side guards
- Height- and depth-adjustable armrests
- Swing-away and removable leg rests with manual angle adjustment for knee extension
- Split footplate with lockable left and right platforms and heel straps
- User-operated push-to-lock brakes
- Anti-tip wheels and rear tipping lever to assist with lifting the front of the wheelchair
Optional equipment:
- Extended wheelchair frame with extended anti-tip wheels
- Wheelchair tie-down brackets for vehicle transportation
- Lateral seat fillers to reduce seat width
- Netti SIT C seat cushion with breathable 3D upholstery and additional temperature-regulating layer
- Additional waterproof cover
- Abduction wedge
- 12.5″ rear wheels with drum brakes
- Lateral supports
- Hip safety belt with automotive buckle
- Leg abduction straps
- Extended-height backrest
- Backrest upholstery with adjustable tension straps
- Lumbar support cushion
- 4-point safety belt
- Cross chest harness
- Contoured armrest for hemiplegic users
- Soft calf pad upholstery
- Foot positioning straps
- Tray table
- Backpack
- Leg warmer
- Sleeping bag
- IV pole holder
Technical Data:
| Seat width | 50 | 55 | 60 cm |
| Seat depth | 40 | 42.5 | 45 | 47.5 | 50 cm |
| Folded length | 78 cm |
| Folded width | 71 cm – 96 cm |
| Folded height | 52 cm |
| Total weight | 34.5 kg – 38.5 kg (depending on configuration) |
| Overall length with footrest | 103 cm |
| Overall width | 74 cm – 84 cm |
| Backrest height without cushion | 49 cm – 59 cm |
| Seat to footrest distance | 28 cm – 56 cm |
| Backrest angle | 86° – 133° |
| Safe slope | 10° |
| Seat plane angle | -9° to +16° |
| Front wheels | 8″ (solid, reinforced) |
| Rear wheels | 24″ (solid, reinforced) |
| Handrim diameter | 53.5 cm |
| Max. parking brake slope | 7° |
| Minimum turning radius (vertical footrests) | 70 cm – 82.5 cm |
| Maximum user weight | 200 kg |
| Max. user weight when used as a car seat | 160 kg |
Documents:
The price includes the wheelchair in its standard configuration. If you wish to select additional options, please contact our office to discuss the details.
To arrange a visit from a representative for individual wheelchair fitting, please contact our office (Available only in Poland).
| Seat width | 50, 55, 60 |
|---|---|
| Upholstery colour | Black |
| Frame colour | Black |
| Manufacturer | Meyra, Mdh |
| Front wheels | Solid |
| Rear wheels | Solid |
| Product code | 488120 |
If you have any questions about this product, please use the contact form below.
This product has no reviews yet.
